How Can You Turn On the Wake On Lan Windows 10

Windows 10 basically provides a feature of Wake-on-LAN to allow turn on your computer remotely whenever you guys are away from it. Keep on reading this post, and you will get a brief introduction to Wake-on-LAN and how you can turn it on. We are going to discuss How Can You Wake On Lan Windows 10. Let’s begin!

What actually Is Wake-On-LAN?

Wake-on-LAN is basically a network standard. When deployed, it basically allows a computer to turn on remotely. It has a supplementary standard that we called Wake-on-Wireless-LAN.

For WoL to work, you guys actually need three things:

  • Your PC must connect to a power supply.
  • Your machine’s motherboard needs to an ATX-compatible. Do not worry about that, most of the modern motherboards meet the requirement.
  • The computer’s network card (ethernet or wireless) needs to be WoL-enabled actually. Again, the good news is WoL support is almost universal actually.

Well, as a protocol, Wake-on-LAN is widespread across the computer world actually. As the support is needed at a hardware level, WoL works on Windows, Mac, and also Linux machines without any issue.

From a Windows standpoint, your machine can also turn on from any of the default power states. Such as hibernating and sleeping, as well as from being completely powered off actually.

Why we Use Wake-on-LAN

Just to give you an instant overview of why you guys would find this useful:

  • On-demand access to files and also resources on a network – you actually don’t have to keep a computer turned all the time.
  • Energy efficiency, you will also see a reduction in your utility bills. As you don’t have to keep your system on all the time as well.
  • It is great for remotely managing a computer so that you can access a computer that might be across the room or upstairs as well.

How Does Wake-On-LAN actually Work?

Wake-on-LAN depends on “magic packets”. At a very simple level, whenever the network card detects the package, it then tells the computer to turn itself on actually. That is why your computer must be connected to a power supply even if it is turned off as well. WoL-enabled network cards will then continue to draw a small charge around the clock. Because they are scanning for the magic packet actually.

The magic packet is basically sent from a server. The server could be many things, that include specialist software, routers, websites, computers, mobile devices, smart TVs, or many other Internet of Things equipment as well.

The server then sends the packet over your whole network. The package itself consists of some necessary information. That includes the details about the subnet, network address, and crucially, the MAC address of the computer that you want to turn on.

All of this information, whenever we combine it into a single packet, is called a wake-up frame. Your network card actually continually scans for them. If a MAC address repeats 16 times in the packet, then your computer knows that it is now a wake-up frame.

Along with wake-on-LAN turned on , your computer will then “listen” for a “magic packet” containing its MAC address when it is in sleep mode. The computer can be woken up through sending it a magic packet from another device on the network as well. Again, you can also find out more about the feature here as well.

requirements

Your computer might not have all of the requirements for this feature that will include the following:

  • Ethernet connection.
  • A peer to peer network between two or more computers.
  • The computer must be in either Sleep or Hibernation mode for this to work as well.

How Can You Turn On the Wake On Lan Windows 10

  • Tap on the Windows key + X in order to bring up the hidden instant access menu, and choose Device Manager.

wake on lan windows 10

  • You have to expand Network adapters in the device tree, choose your Ethernet adapter. Then right-click it and then choose Properties.
  • Then you have to choose the Power Management tab and check off all three boxes shown below.
  • Next, choose the Advanced tab, scroll down in the Property box, and choose Wake on Magic Packet. And make sure that it is turned on in the Value list box then tap OK.

wake on lan windows 10

How can you Configure Wake on LAN?

If you want to make things easy, I have found it really easy to use utility simply called Wake-on-LAN. That you can download here for free. This handy utility needs minimal setup and is really easy to configure.

You have the MAC address ready for the remote computer that you would like to wake up actually. In order to find the MAC address, make sure your PC is connected to your router through a wired Ethernet connection. Disconnect any wireless connections that you may have using actually.

You have to open the Network and Sharing Center from the Settings menu. Then in the upper-right pane, tap on the Ethernet connection. In the Ethernet Status window, you have to click Details, and then you will see the physical MAC address.

When you download and install Wake-on-LAN, then open the utility and choose File > New Host. Now under the Display Properties tab, enter the name of the machine and also a group name if you want.

Choose Wake Up tab and then enter the following information:

  • MAC Address of the remote machine
  • Choose Broadcast IP
  • For broadcast you have to leave the default.
  • Then enter the machine hostname for FQDN/IP – you can also find this information for the remote machine under Windows key + X > System > Computer name:
  • Tap on the IPv4 list box and choose your physical Ethernet adapter
  • Press OK

How to wake up a PC:

Well, in the Wake on LAN utility, right-tap on the computer and choose “Wake Up” from the list.

That’s just it! If you guys are having problems getting this to work, then check out some of the troubleshooting tips below.

Troubleshooting Wake-on-LAN

Most of the time, Wake-on-LAN might not work even if you have turned on it successfully. It is most likely cause because of the fast startup. If you guys want to fix it, then you should turn it off fast startup. You just have to open your Control Panel and then navigate to System and Security -> Power Options. Then, tap on select what the power buttons do from the left pane to get the following interface.

wake on lan windows 10

You can also find Turn on fast startup option which is turned on by default under Shutdown settings. By default, the setting can’t be changed manually, so that you have to tap Change settings that are currently unavailable. Now, you can uncheck the fast startup option in order to disable it and tap Save changes.

Conclusion

Alright, folks, I hope you like this article and understand now. If you have any issues and queries related to it, just comment down and let us know.

Keep Smiling!

Also See: How to Install OneDrive in Windows 10

Leave a Reply

Your email address will not be published. Required fields are marked *