How Do I Fix a Black Screen on Windows 10

On Windows 10, one of the most irritating problems that you can stumble upon is a black screen. As you won’t see an error code or message printed on the screen in order to get a hint on where to start troubleshooting. We are going to discuss How Do I Fix a Black Screen on Windows 10. Let’s begin!

A black screen could happen for many reasons actually. It might be related to an issue along with a recent graphics driver update. Or it could occur during the installation of a feature update that also includes a compatibility problem as well. It can also happen as a result of a buggy system update. Or it can be a hardware related issue with the display, connection, or video adapter as well.

Well, whatever the reason it might be, there are many ways to determine the cause and solve this problem on Windows 10. If you have access to the desktop or not actually.

How Do I Fix a Black Screen on Windows 10

Resolve Black Screens During or After the Windows 10 Installation

Black screens are most of the time encountered whenever you install Windows 10 for the first time. This may also happen during the Windows 10 install process or also just after the Windows setup is complete. There are also a few potential causes as well.

Observe the hard drive activity LED closely in order to determine if the computer is still working. If the LED is still blinking, then it means setup is probably still busy working on sorting through your files and also determining what to move and what to keep. This is also a good sign, which means you should wait a little more. If setup goes beyond 2 to 7 hours, then the setup may be stuck actually.

If the setup is stuck. Then Power down your computer completely and try again. Follow these steps now:

  • You have to power down the computer completely. If it won’t shut down, then hold the power button for 5 to 10 seconds until it shuts down actually.
  • Disconnect from the internet through unplugging the Ethernet cable or switching off the wireless adapter (if its possible).
  • Disconnect all of your unnecessary peripherals from the PC. Remove external hard drives, game controllers, phone chargers, and also much everything but the keyboard and mouse.
  • Then remove power from your computer. Disconnect the power cord from the outlet actually. However, if it’s a laptop, removes the battery, too. Now wait at least 30 seconds before plugging your computer back in. (Note: If you have the time to spare, then leave the computer unplugged for up to an hour. This will definitely help if your computer started to get overheated.)
  • Connect the system to power again, however, leave the internet disconnected. Power on the computer as well.
  • Hopefully, Windows will actually try to resume or restart the Windows 10 setup process.
  • If the installation completes normally and you get to a Windows desktop along with a Start menu and everything. Go ahead and then reconnect to the internet to finishing downloading and applying updates as well.
  • If the setup rolls back to your previous version of Windows, then try to upgrade manually using the Media Creation Tool or an ISO file.

How can you Fix Random Black Screens: Advanced Troubleshooting Options

There are black screens that happen out of the blue actually. Windows 10 new servicing model (i.e. endless patches and updates as well) means that Windows updates, patches, security fixes. And also the driver updates are mostly downloaded in the background and installed at night completely unbeknownst to you actually. If you want to manage which Windows updates to install and when then you can. However, if one has already snuck past you and given you a black screen, try to boot in Safe Mode.

fix a black screen

A corrupt user profile can most of the time trigger a black screen. Attempting to boot into Safe Mode, create a new user account, then attempting to sign into it might work as well.

The RunOnce Processes can also be a culprit actually. If you all see is a black screen after logging in, then tap on Control + Shift + Esc on your keyboard. This will then open the Task Manager. Now head to the Processes and also Services tab, then look for any instances of RunOnce32.exe or RunOnce.exe. If you guys find any that is running, stop the process, cancel the application, or end the service as well.

  • Tap File Run new task, type: cmd then click Enter. Now the command prompt, you guys have to type:
shutdown -r -t 01
  • Then, press Enter. This will restart your computer now.

How can you Use Safe Mode to Troubleshoot Black Screens?

Well, booting into Safe Mode can be used to troubleshoot random black screens or black screens that encountered during a Windows 10 install. In order to get into Safe Mode, you have to do the following: Turn your computer on and off three times. While booting, you have to make sure you turn off the computer whenever you see the Windows logo.

Now after the third time, Windows 10 will boot into diagnostics mode actually. Tap on Advanced options when the recovery screen appears.

  • Then Troubleshoot.
  • Press the Advanced options.
  • Tap on the Startup Settings.
  • Press the Restart.
  • Click on number 4. This will then start Windows 10 in Safe Mode.
  • Sign in, tap on Windows key + X, click Device Manager, expand Display Adapter, right-tap on the display driver then press Disable. Restart your computer to see if the setup completes successfully or you can also boot to the desktop. If you can reach the desktop, check Windows Update or the manufacturer’s website for the latest driver as well.

fix a black screen

Disconnect non-essential devices | fix a black screen

Peripherals connected to the computer may be actually the reason for the black screen or black screen with the spinning dots during startup for a long time actually. (Mostly, spinning dots during startup indicates that an update is installing, and you have to wait a few moments. However, if it takes a really long time, then it could be a compatibility problem along with the hardware.)

If you experience something the same as that, disconnect all peripherals. That includes printers, cameras, removable drives, Bluetooth, docking stations, and many other USB devices from your computer.

You have to restart the device one more time, and if everything works normally, then the problem is one of the peripherals actually. You guys can determine which device is actually causing the problem through reconnecting one at a time until you stumble upon the one causing the conflict.

When you know the peripheral causing the issue, then disconnect it, restart the computer. Search online in order to find a solution, or contact your device manufacturer for additional assistance as well.

Check connection issues | fix a black screen

Well, if the black screen appears before you can sign into the account, then it’s likely a connection problem between the display and computer actually.

In this situation, you have to re-check the physical connection and make sure both ends of the video signal cable are connected correctly. And it’s using the correct output port actually. Disconnect the video signal cable from both, reconnect it again, and then move the mouse in order to see if the display wakes up.

Also, you have to make sure that the monitor is receiving power, and the power button is turned on actually. (You may also need to check your manufacturer support website for more specific details actually.)

If you guys have multiple video outputs, then try to switch the connection to a different port actually. And move the mouse around or click on any key on the keyboard to wake up the display. Most of the time, a driver update could include changes, which can send the video signal to the wrong port (DisplayPort, HDMI, DVI, Thunderbolt, VGA).

If you guys have a laptop, use the keyboard shortcut to increase the display brightness. Mostly, you will need to tap on the Function (Fn) key and one of the Functions keys (such as F8 or F10). You can also try to connect the monitor to a different computer or also use a different video signal cable. (DisplayPort, HDMI, DVI, VGA, or Thunderbolt) in order to determine if you guys are dealing with a broken display or video card, or damaged cable actually.


Alright, folks, I hope you like this “fix a black screen” article and understand now. If you have any issues and queries related to it, just comment down and let us know.

Keep Smiling!

Also See: How To Make Gmail Show Only Unread Email

Leave a Reply

Your email address will not be published.