How to fix the issue “SD Card Can’t Be Read”?
Do you guys also have trouble with your SD card? If yes, so then read out this guide, here you will find the solution for this problem. Well, SD cards can also fail for lots of reasons. Luckily, there are steps you are also able to take to fix the problem. In this guide, you will find some of the things which you guys can also do to get your SD card back in working condition. In this guide, you will learn the way to fix the issue “SD Card Can’t Be Read”?
You have been putting the blame on your SD card. But what whether the issue lies in the card reader?
Check the Card Reader to fix the issue “SD Card Can’t Be Read”
Whether the card just fails on one appropriate device, though it could very fine be a card reader issue. Occasionally built-in card readers in PCs have to be repaired or replaced. So check it and see whether there is any physical injury. However, use a spare SD card to check whether the card reader is unable to detect any card that is plugged in.
Whether you guys are using an external card reader, you are also able to try replacing the cables with a compatible substitute. Defective cables can cause card readers to prevent working accurately.
Use Various USB Port to fix the issue “SD Card Can’t Be Read”
Well, Guys! some PCs also have more than one USB port. Examine your computer’s I/O. Whether there are USB ports on both front & back panels, so try making the switch.
Whether the card reader works on one port. But not the other, so you guys could also be having a USB port problem. And not an SD card issue as you originally thought.
You probably also want to look into swapping the USB cable with another one.
Reboot the Computer
That is old but good, restarting the computer is a time-tested remedy that surprisingly fixes most issues that users experience. Though disconnect the card reader then reconnect after rebooting. See whether the problem persists.
Update the Drivers to fix the issue “SD Card Can’t Be Read”
However, most USB card readers consistently install drivers when you guys plug them in for the first time. So enhancers would often update their drivers in order to resolve the bugs or make refinements to their product. Similarly, these updates are made publicly available in order to download but would often go unnoticed.
Hence check with your card reader’s enhancer whether there are updates available. Install if there are any. See whether that will get rid of the issue.
Check My PC
Whether the USB drive is not recognized & no drive letter is displayed in My Computer. However, it is possible that your PC is low on memory. Though try closing all programs & have it run idle for a few minutes.
On the other hand, you can also use Task Manager (Windows) or Activity Monitor (Mac) to force stop memory-intensive apps.
Whether no new drive letter is displaying when plugging in a USB card reader. You probably have to manually offer the drive a letter using Disk Management.
Disable the Write Protection
Whether your SD card is recognized. But you guys are having a hard time modifying files. You simply probably have read-write protection enabled. Memory cards also have a physical toggle located on their side. You probably have accidentally turned it on during controlling.
Therefore turn off read-write protection and see whether that fixes the SD card issue.
Format for the Right Device
Alright, guys! Formatting an SD card or micro SD card will clear all its contents. And somewhat restore it to its actual state. Though format settings are there that can affect what devices can also read the SD card. Similarly, it is possible you probably have formatted the SD card just to work on PCs & not on smartphones, for instance.
So to make a card readable on your preferred device, you are heading to have to reformat it again. Although you have to remember that it would clear all the files that are recently on your SD card. Similarly, formatting should only be completed whether you are comfortable with losing all your data. Additionally, you would force to use data recovery software.
Confidently, one of the instructions that are mention above easily gets you access to the data on your SD card. Whether nothing has worked, so there could also be an issue with the SD card itself. So guys try it on various PCs and devices.
Must read this article: In Windows Fix this error “not recognized as an internal or external command”
Well, SD cards can also fail for lots of reasons. Luckily, there are steps which you are also able to take to fix the problem. In this guide, you have found some of the things which you guys can also do to get your SD card back in working condition. So we hope that you guys like the guide. If you have any queries so then you can ask us in the comments section below.