USB is a comprehensively adopted technology that permits us to plug many devices into our PCs every day. Although it is pretty straightforward to set up, occasionally it’s not all plug & play. What do you guys do when your USB drive is not showing up?
Well, this can be caused by lots of different things just like a damaged or dead USB flash drive, outdated software & drivers, partition problems, wrong file system, & device conflicts. Other causes such as defective hardware, a dead system controller, or USB ports also need professional assistance from your device enhancer or a certified PC technician.
Whilst it is not too easy to pinpoint the same reason why your PC won’t recognize the USB stick. You guys are also able to work just via various possible solutions until it works again.
We have rounded up some effective remedies that are able to also work when you are encountering USB connection problems. Most of these also apply to various devices just like disk drives, mice, video game controllers & furthermore, which require a connection through USB.
Also, you must have to check out our quick YouTube video above where we go through some of the remedies down below. Whether you guys are getting a USB Device not Recognized error, we have a remedy for that as well.
Fix a Plugged-In USB Drive Not Showing Up
- Preliminary checks
- Check for device compatibility
- Update your OS
- Windows Troubleshooter tool
- Use Disk Management tool
- Try plugging into a various PC or USB port
- Troubleshoot drivers
- Use Device Manager in order to scan for hardware changes
- Make a new drive volume & assign a drive letter
- Disable USB Selective Suspend feature
- Check That Your USB Device Is On. However, when you guys connect your USB stick to your PC. Though it should ideally turn on instinctively with flashing lights on the unit specifying activity. Some units also have a dedicated power cable or physical power button that you guys have to turn on manually, for your PC to detect it.
- Examine The USB Stick For Cracks. It is possible that the flash drive could also have been injured just without your knowledge. So check it physically to rule out any problems before trying again.
- Restart Your PC. This probably is an old tech support standby. But it resolves many issues, especially those caused by software defects. However, unplug the USB stick, shut down your PC & unplug it from the power source. Well, guys here you have to wait up to one minute before rebooting your PC and trying the flash drive again.
- Permit Your PC To Load Fully before trying the USB stick again. Some PCs able also be to slow and get submerged by the multiple operations they have to run during startup. So it is possible that your USB stick probably is getting overlooked.
Check For Device Compatibility
Whether your USB stick is not meant in order to work with your PC. Then it won’t display when you plug it in. In Windows Computers, most USB 3 devices are also able to connect to USB 2 ports, though that should not be much trouble.
Although with advances in technology, a USB 3 device probably requires a too strong & compatible port to work. Simply check your device’s instruction manual or packaging for compatibility info before trying again.
Update Your Operating System
Whether you guys are using Windows, updating the OS comes with essential files that support various hardware and devices, plus resolves any errors you probably encounter.
- Here you have to, first of all, head to the Settings > Update & Security.
- Now tap Check for Updates. Whether there are any pending updates, download and reboot your PC just before trying your USB stick again.
Must read this article: How To Create 3×5 Index Card Template On MS Word
Use Disk Management Tool to Fix the issue USB Drive is Not Showing Up
However, this tool checks if Windows will e your USB stick. It also displays all the hard disks connected to your computer. And you guys are also able to review the info just like the partitions, sizes, and furthermore.
- First of all, you have to Plugin your USB stick & right-click Start > Disk Management.
- Now check for your USB stick under primary or secondary disks. Whether it does not has the partitions, so it will appear as Removable.
- Whether you view it in the Disk Management utility, you are also able to make a new volume and assign a drive letter. In this way, you guys are also able to partition or format the flash drive. In order to make it easily detectable by other devices, including your computer.
- Whether your USB drive is not showing up, so it could be a driver or hardware issue, or the drive is dead.
Try Plugging Into a Various PC Or USB Port
Unplug the USB stick from the RECENT port and PC, and try plugging into various PC and/or USB ports. Whether it works on the new USB port or PC, though the USB port probably is damaged or dead, or the PC itself probably has an issue.
A defective, damaged, or dead USB port presents issues just like failure to detect USB drives or displays error messages. So you have to just check whether the port is clean, dust-free, & firm. Whether it is moving up & down or feels loose, then it’s defective/damaged.
Whether you guys are using a USB hub, unplug the stick from the hub & plug it directly into your PC. Though some hubs have inadequate power for external drives to function, which probably be the case with yours.
Whether the USB drive is not displaying even after trying a different port, PC, or checking in Disk Management, the drive is may dead and have to be replaced.
You guys are also able to troubleshoot driver problems just by using the Device Manager. Especially whether your USB stick is detected by a different PC other than the one you guys are using, signaling a driver issue.
- Here you have to first of all Right-click Start>Device Manager.
- Expand Disk drives & also check for a yellow exclamation point next to any of the listed devices. Though whether there is one or more with this mark, next the device(s) has a driver issue.
- Simply you guys must Right-click on the difficult device and choose Properties to view the related error message. You guys are also able to search for the error online to find a solution to the issue.
You are also able to try the following solutions to fix driver issues:
- Rollback the driver in order to revert to new driver updates & restore the device back to a time when it was working accurately.
- Download drivers from the device enhancer’s site from the downloads page, support page, or just by searching on the site for the right driver.
- Update the driver simply by right-clicking on the driver in Device Manager, choose the Update driver & follow the prompts.
- Uninstall the device from your PC, must reboot it & also wait for it to reinstall the right driver & configurations.
Use Device Manager In order To scan For Hardware Changes to Fix the issue USB Drive is Not Showing Up
- Here firstly Right-click Start and choose Device Manager.
- Tap Action > Scan for hardware changes.
Windows will try to find your USB stick so you guys are also able to access it again.
Reinstall USB Controllers to Fix the issue USB Drive is Not Showing Up
This method supports where the USB driver is unstable or corrupted.
- Here first of all you have to head to Right-click Start>Device Manager & tap on the Universal Serial Bus controllers in order to expand the list.
- Right-click your device & click Uninstall, and then reboot your PC to reinstall the controllers automatically.
Make a New Drive Volume and Assign a Drive Letter
Whether your device appeared in the Disk Management step. However, you guys are also able to create a new drive volume & also assign a drive letter. However, the Disk Management tool resolves partitioning and file system issues with different drives.
Though your USB stick probably shows only Unallocated space, in which case you guys will have in order to make a new partition so that Windows & other operating systems can utilize it.
- Now you should right-click Start>Disk Management, right-click on the Unallocated space>New Simple Volume & you must follow the prompts in order to create a partition.
Whether you are still unable to view your flash drive, so far it is partitioned, confirm that it has a drive letter. Preferably, this should be automatic, but whether you guys cleared it manually, the drive won’t be checked or accessed in Windows.
- Right-click the drive’s partition & tap Change Drive Letter & Paths.
- Whether it does not have an assigned drive letter, tap Add and select a letter. Whether it has a letter, click Change and select a different one.
Disable USB Selective Suspend Feature
Well, Guys! This is a power-saving setting that supports reduce battery use by cutting power to your USB stick when it is plugged in. in order to confirm your drive is not powering down for any cause, disable this feature so that power management settings do not override the USB controller, that also makes Windows not detect it.
- First of all, you guys have to tap Start>Control Panel and choose the Hardware and Sound.
- Tap Power Options>Change plan settings.
- Tap Change advanced power settings.
- Head to the USB settings and expand it.
- Now you must have to tap USB selecting suspend settings & change the Plugged in scroll-down menu to Disabled (Important Note: Whether you guys are using a laptop, tap On battery and alter to Disabled in the Scroll-down menu).
- Tap Apply>OK and reboot your PC to affect the conversions.
Must read this article: How to Fix if Windows Explorer Keeps Crashing
Whether all else fails, so you guys are able to also replace your USB stick as a last resort method. However, you guys are also able to do this whether the drive is already broken. And we also hope that this guide also has helped ease the process. And you guys now know what to perform when your USB drive is not showing up when you plug it in.