How to Fix Windows PC Won’t Sleep

Sleep mode is actually a low power mode in computers where this mode saves lots of electrical consumption. Upon resume, the device loads the last session so that you can avoid the hassle of opening applications or starting your work again as well. The machine state is in RAM actually; whenever issued the sleep command, the computer powers off un-needed processes and also sets the RAM to the minimum power state actually. We are going to talk about How to Fix Windows PC Won’t Sleep.

Due to the power-saving state, you guys can also set timers in order to make your laptop go into sleep mode automatically. But, many users reported that after the upgrade to Windows 10, their computer won’t sleep automatically like it used to before. This problem can be traced back to many reasons like a controller disrupting the sleep timer of your computer or a third-party application that keep the computer awake. You have to follow the solutions from the top and work your way down as well.

How to Fix Windows PC Won’t Sleep

Are you guys having problems where Microsoft Windows 10 won’t go into sleep mode? This tutorial will definitely help you to figure out the problem.

Power Options

  • First, you have to choose the “Start” button, then choose “Settings” (gear icon).
  • Then you have to select “System“.
  • Choose“Power & sleep“.
  • Make sure the “Sleep” setting is set to the desired value.
  • Then choose “Additional power settings” in the right pane as well.
  • Then select “Change Plan Settings” next to the option that you have selected

pc won't sleep

  • Choose “Change advanced power settings“.
  • Now on the “Power Options” screen, you want to expand each and every setting and make sure that they allow the computer to go to sleep mode. Well, in my case, the setting under “Multimedia settings” > “When sharing media” was basically set to “Prevent idling to sleep“. I had to set this to “Allow the computer to sleep“ actually. If you are feeling lazy, then just hit the “Restore plan defaults” button and that should toggle all items to where sleeping is allowed in Windows 10 actually.

pc won't sleep

Sensitive Mouse

If you guys have a sensitive mouse, any vibration near your PC could be keeping your machine awake actually. Try these steps in order to prevent the mouse from waking your machine.

  • First, you have to choose the “Start” button, then type “device“.
  • Now open “Device Manager“.
  • You guys need to expand the “Mice and other pointing devices” section.
  • Right-click on the mouse you are using, then select “Properties“.
  • Choose the “Power Management” tab.
  • Now uncheck the “Allow this device to wake the computer” box, and then choose “OK

pc won't sleep

Network Adapters

These steps are just the same as Fix 2, only you are checking under “Network adapters” actually.

  • Choose the “Start” button, then you have to type “device“.
  • Now open “Device Manager“.
  • You guys need to expand the “Network adapters” section.
  • Check under each of the options through right-clicking and choosing “Properties“.
  • Then uncheck the “Allow this device to wake the computer” box, then choose “OK” for every network card.

Conclusion

Alright, folks, I hope you like this “pc won’t sleep” article and understand now. If you have any issues and queries related to it, just comment down and let us know.

Keep Smiling!

Also See: How to Send a Picture in Email From Android

Leave a Reply

Your email address will not be published. Required fields are marked *