How To Fix Your Computer Won’t Sleep In Windows 10

Are you wondering to fix your computer won’t go to sleep mode? Putting your computer to sleep is the best way to save energy while still ensure you can continue without wasting your power. But what can you do when your computer or laptop won’t go to sleep? With lots of factors coming into play, it can be a complex issue to diagnose.

The process gets complicated with many PC manufacturers. The best method to fix this issue problem is to try various solutions. Here are some methods and steps to fix the issues in Windows 10.

Steps To Fix PC Won’t Go To Sleep:

Different methods are given below to fix the issue:

  • Power Options
  • Sensitive Mouse
  • Network Adapters

Method 1 – Power Options

Power Options

Step 1:

Initially, Choose the “Start” button, then choose “Settings” (gear icon).

Step 2:

Then choose “System“.

Step 3:

Pick “Power & sleep“.

Step 4:

Make sure the “Sleep” setting is set to the desired value.

Step 5:

Then tap on “Additional power settings” located in the right pane.

Step 6:

Then tap the “Change Plan Settings” located next to the option that you have chosen.

Step 7:

Choose “Change advanced power settings“.

Step 8:

From the “Power Options” screen, just expand each setting and make sure that they enable the PC to go to sleep mode. In my situation, the setting at the bottom of “Multimedia settings” > “When sharing media” was set to “Prevent idling to sleep“. Then I set this to “Allow the computer to sleep“. If you’re lazy, simply press the “Restore plan defaults” button and it should toggle all items to where sleeping is enabled in Windows 10.

Method 2 – Sensitive Mouse

Sensitive Mouse

If you are working with a sensitive mouse, any vibration near your computer could be keeping your system awake. Try these instructions to secure the mouse from waking your PC.

Step 1:

Choose the “Start” button, then input “device“.

Step 2:

Head over to the “Device Manager“.

Step 3:

Then expand the “Mice and other pointing devices” section.

Step 4:

Right-tap on the mouse you are currently using, then select “Properties“.

Step 5:

Choose the “Power Management” tab.

Step 6:

Unmark the “Allow this device to wake the computer” box, then choose “OK

Method 3 – Network Adapters

Allow this device to wake the computer

These instructions are quite similar to method 2, only you’re checking under “Network adapters”.

Step 1:

Choose the “Start” button, then input “device“.

Step 2:

Head over the “Device Manager“.

Step 3:

Then expand the “Network adapters” section.

Step 4:

Mark under each of the options by right-tapping and choosing “Properties“.

Step 5:

Unmark the “Allow this device to wake the computer” box, then choose “OK” for each network card.

Conclusion:

I hope this article helps you to fix your problem. If you still facing issues with your Windows 10 PC sleeping, then let us know in the comment section below!

Also Read:

Leave a Reply

Your email address will not be published. Required fields are marked *