Ways To Connect Two Computers Windows 10 In Networks

Connect Two Computers Windows 10

You can connect Two Computers to Windows 10 by using the ad hoc local network. This can be very useful if it can allow you to share files. Also, the game together when you can’t trust.  Now, this can don’t have a wireless network. In order to do so then the first step is to plug a Crossover Ethernet Cable from one device into the other. On the other hand, this can also be done with the use of a hub or router. Also, the steps will be the same. You just have to make sure that both of the computers can connect to the same one. Now you have to keep in mind that the connection type will be different depending on which type of connection you are using.

When you can connect to it then you need to configure the two Ethernet adapters. In order to be able to communicate. You just have to open the Control panel and then browse to the Control Panel. Then click on the Network and Internet option then click on the Network and Sharing Center. Now you have to click on the change adapter settings that are available on the left-hand side.

Also Read: How to Turn On and Turn Off the Numlock at the Windows Startup

How To Change adapter settings to Connect Two Computers Windows 10?

Connect Two Computers Windows 10

You have to right-click on your Ethernet device and then you can select the properties. By using the adapter properties you have to double click on the Internet Protocol Version 4 (TCP/IPv4).

Also Visit: XPS Viewer Windows 10: Ways To View XPS Documents

How you can Configure The IPv4 settings to Connect Two Computers in Windows 10?

Connect Two Computers Windows 10

Also, you can set the IP address to be 192.168.0.1, and also the subnet mask is to be 255.255.255.0 on the first device. By using the second device also the IP address should be 192.168.0.2 and then the subnet mask should be the same as the first host. You can also apply the changes just by clicking on the ok until you are back to the list of network adaptors.

Also Read: Ways To Factory Reset Nexus 5X Hard and Soft Reset

How To Configure an IP address and subnet mask.

When both of the computers can connect and have the IP addresses that can be assigned. You have to go back to the Network and Sharing Center and then click on the Change advanced sharing settings that are available on the left-hand side. By using the advanced sharing settings menu you have to ensure that the Turn on network discovery and then Turn on automatic setup of network-connected devices that are both enabled.

Network

Also See: Why Does Android Phone Randomly Keeps Rebooting: Fix

To Ensure network discovery is enabled.

You can also enable the network discovery that will also allow the Windows 10 devices to identify each other. In order to communicate using the network protocols. In case, if you want to connect to a game, web, or the FTP server this should now work.

You should also want to share files through Windows’ file-sharing features. Then you will need to enable the File and printer sharing from the same menu. After that, you can also enable network discovery. Then this will also need in order to configure the files and the folders that can share.

Related Article: How to Fix ‘USB Port Not Working” in Windows 10

Conclusion:

In order to do so then the first step is to plug a Crossover Ethernet Cable from one device into the other. On the other hand, this can also be done with the use of a hub or router. Also, the steps will be the same. You just have to make sure that both of the computers can connect to the same one. Now you have to keep in mind that the connection type will be different depending on which type of connection you are using.

Hope you will understand this topic!

Leave a Reply

Your email address will not be published. Required fields are marked *